SDS

Lithium-ion Battery Pack IS12B 10.8V 15.7Wh
_
____________________________________________________________________________________________
_
____________________________________________________________________________________________
Page 5 / 12
Storage Conditions
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach
of children. Store locked up. Protect from moisture. Store away from other materials.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Exposure Limits
.
Chemical name ACGIH TLV OSHA PEL NIOSH IDLH
Copper
7440-50-8
TWA: 0.2 mg/m
3
fume TWA: 0.1 mg/m
3
fume
TWA: 1 mg/m
3
dust and mist
(vacated) TWA: 0.1 mg/m
3
Cu
dust, fume, mist
IDLH: 100 mg/m
3
dust, fume
and mist
TWA: 1 mg/m
3
dust and mist
TWA: 0.1 mg/m
3
fume
Aluminum
7429-90-5
TWA: 1 mg/m
3
respirable
particulate matter
TWA: 15 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
fraction
(vacated) TWA: 15 mg/m
3
total
dust
(vacated) TWA: 5 mg/m
3
respirable fraction
TWA: 10 mg/m
3
total dust
TWA: 5 mg/m
3
respirable
dust
Chemical name Alberta British Columbia Ontario TWAEV Quebec
Copper
7440-50-8
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
TWA: 0.2 mg/m
3
TWA: 1 mg/m
3
Aluminum
7429-90-5
TWA: 10 mg/m
3
TWA: 1.0 mg/m
3
TWA: 1 mg/m
3
TWA: 10 mg/m
3
Other Exposure Guidelines
Vacated limits revoked by the Court of Appeals decision in AFL-CIO v. OSHA, 965 F.2d
962 (11th Cir., 1992). See section 15 for national exposure control parameters.
Appropriate engineering controls
Engineering controls
Showers
Eyewash stations
Ventilation systems.
Individual protection measures, such as personal protective equipment
Eye/face protection
Face protection shield.
Hand protection
Wear suitable gloves. Impervious gloves.
Skin and body protection
Wear suitable protective clothing. Long sleeved clothing. Chemical resistant apron.
Respiratory protection
No protective equipment is needed under normal use conditions. If exposure limits are
exceeded or irritation is experienced, ventilation and evacuation may be required.
General hygiene considerations
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with
skin, eyes or clothing. Wear suitable gloves and eye/face protection. Do not eat, drink or
smoke when using this product. Remove and wash contaminated clothing and gloves,
including the inside, before re-use. Regular cleaning of equipment, work area and clothing
is recommended. Wash hands before breaks and immediately after handling the product.
Contaminated work clothing should not be allowed out of the workplace.
9. PHYSICAL AND CHEMICAL PROPERTIES