What’s in the box? ONYX AC adapter 3.5mm stereo cable User manual ※ Please, use provided adapter only.
Using your Speaker TURING ON/OFF Turning ON Turning OFF CHARGE THE BATTERY Before using speaker, charge the battery completely. To charge the battery, connect the power supply to the speaker and plug it into a live AC outlet. The Red LED remains on while the speaker is charging and Red LED will be off when charging is completed.
CHECKING THE BATTERY LEVEL The battery status indicator will be shown on iPhone or iPad LOW BATTERY ALARM When battery is low, speaker will alarm with beep every 1 minute. Once you hear beep alert, please charge immediately. TO BEGIN PAIRING WITH A BLUETOOTH DEVICES 1. Turn the ONYX on. When turned on for the first time, ONYX will go to pairing mode automatically. Or Press the MFB button for 3 seconds until LED blinks as Blue.
2. Set you Mobile phone or Bluetooth device to Bluetooth discoverable mode. (Visibility on) 3. Set your Mobile phone or Bluetooth device to discover the ONYX, then locate the Bluetooth device list. 4. From the Bluetooth device list, select the device named “ONYX” 5. If your devices asks for a passkey, enter digits 0000 (four zeros) and press OK. 6. Your Bluetooth devices indicates when pairing is completed. The ONYX speaker announce as “Connected” when pairing is competed and Blue LED remains.
TO ADD ANOTHER SOURCE You can use another audio device with ONYX. This requires using an 3.5mm stereo cable with a 3.5mm plug on one end to connect with the AUX port on ONYX. PLAYING MUSIC Play / Pause Music: Press the MFB button shortly MAKING A CALL Last call redialing: Press MFB button twice. Voice dialing : To activate or deactivate voice dialing, press the MFB button for 1 second.
ANSWER / END A CALL Press the MFB button. DECLINE AN INCOMING CALL Press the MFB button for 1 second. Transfer a call from ONYX to Mobile phone (or Mobile phone to ONYX) Press the MFB button for 1 second. VOLUME CONTROLS Increase and Decrease the volume using volume control wheel. There will be beep sound on minimum and maximum volume level. MUTING Mute or Unmute the built-in microphone by holding MFB button for 3 seconds. RESET THE ONYX Press MFB button for 3 seconds on pairing mode stage.
Status Status Power On LED Lighting LED flashes in Blue 3 times Pairing mode LED flashes in Blue rapidly Beep / Voice announcement Power ON Disconnected mode LED flashes in Blue every 5 seconds Disconnected Connected mode LED flashed in Blue 2 times every 5 seconds Connected Making a call LED flashed in Blue 3 times every 5 seconds Incoming call LED flashes in Blue 2 times every 2 seconds Playing a music LED flashes in Blue 3 times every 5 seconds Mute Reset Ring Beep in every 10 seconds
Specification Model Name ONYX Bluetooth Core Spec Bluetooth Specification 3.0 Profile HSP/HFP1.6(Wide Band Speech), A2DP, AVRCP Bluetooth Class Class 2 Coverage Range 10 Meters Continuous Play Time Standby Time Weight approx. 10 Hours approx. 500 Hours 1100g Charging Voltage DC 5.0 V Charging Time approx. 3 Hours Operating Temperature -10° to +50°C Storage Temperature -20° to +70°C Output Power 6 W (2 CH, 3 W x 2) Battery Lithium Polymer 3.
SAFETY AND GENERAL INFORMATION 1. Please read this guidebook carefully and follow the instruction. 2. To avoid any damage or malfunction of the unit, do not drop it from high place. 3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then do not operate it normally to avoid any electrical shock, explosion and damage of the unit. 4.
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. is connected. Consult the dealer or an experienced radio/TV technician for help.” FCC RF Radiation Exposure Statement 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
WARRANTY The condition of this warranty and our responsibilities under this warranty are as follows: Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only. You must be able to prove the date of original purchase of the unit with a dated receipt. The warranty is not applicable if the product has been subject to physical abuse, improper installation, modification or repair by unauthorized third party.
and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. [IMPORTANT NOTE] To comply with RF exposure requirements, this device may not be co-located with any other transmitter or antenna.
