User manual

X7968r User’s Guide
14 Appendix E - Advanced DSL port
attributes
The following table displays detailed information about the advanced DSL port attributes.
Note
You should only need to refer to these attributes if your ISP has
asked you to check something or if you are experienced in DSL
port configuration.
Attribute Value
Line Rate DSL down stream trained rate (cells/sec)
TxCellTransmitted Number of transmitted ATM cells
RxCellReceived Number of received ATM cells
Cbr_CPS Bit rate for CBR QoS Class
Rvbr SCR_CPS Sustained cell rate for rt-vbr
Vbr SCR_CPS Sustained cell rate for nrt-vbr
Rvbr PCR_CPS Peak cell rate for rt-vbr
Vbr PCR_CPS Peak cell rate for nrt-vbr
Ubr_CPS Cell rate for UBR+
Ubr MCR_CPS Minimum Cell rate for UBR+
CACMode Gives CAC Mode
CACFunction Call Admission control function
Function to accommodate the port speed
changes
Port Speed Hook
Vpi Range Range of valid VPI
Vci Range Range of valid VCI
Default Pcr Default Peak Cell Rate
Gives weather traffic shaping is
enabled/disabled
Traffic Shaping
Ni Type Network Interface Type
Is Dsl Dma Up Operational Status of DSL DMA block
Enabled Channels Number of enabled channels
DSP Firmware Version DSP code version number
DSP Version DSL driver version number
Connected Current connected state:
True – modem is connected to a remote modem
False – modem is not connected to a remote
modem
Operational Mode
Current operating (connected) mode
(modulation)
78