User manual

X7968r User’s Guide
Figure 56: Dynamic IP Routing Configuration
To enable the dynamic routing:
 Select the Interface where to share and exchange the routing table. Click Edit.
 Select the RIP Version as 1, 2 or both.
 Select the Operation Mode as Active, Passive, or Send Only.
 Select Enabled.
 Click Apply.
Dynamic DNS
The Dynamic DNS feature allows you to bind the dynamic assigned WAN IP address into
a specified domain name. You could pass this domain name to friends to access your
service in your site instead of informing them every times if WAN IP address is changed.
Figure 57: Dynamic DNS Configuration
49