User manual

X7968r User’s Guide
Server Settings
This page allows you to create DHCP server subnets and DHCP server fixed host IP/MAC
mappings.
Figure 37: DHCP server Configuration – Server Settings
You may click the Add Subnet to open below page.
 Enter the Subnet value, Subnet mask, Maximum lease time, and Default lease
time. By default, the maximum and default lease time are specified as 86400 and
43200 seconds respectively.
 Specify the IP Address range by entering the Start of address range and End of
address range. You can select the option Use a default range. to specify a default
range.
 You may select Use local host address as DNS server to allow DHCP server to
specify its own IP address.
 You may select Use local host as default gateway to specify the local host as
default gateway.
 Click Apply.
37