User manual

X7968r User’s Guide

WDS Settings

WDS stands for Wireless Distribution System. It enables the access points (AP) to be

connected on wireless in the same channel to extend the coverage. You can either remove

an existing WDS functionality. To remove a WDS link to an AP, reset the MAC address

associated with the required port to 00:00:00:00:00:00 from web page.

Figure 24: Wireless Network – WDS Settings

Global Setting

 Enable/Disable the Wireless Distribution System (WDS) feature

 Click Apply to enable this feature.

 Select WDS Port Setting from 1 to 4 and enter the MAC address of wireless AP.

To remove the WDS to an AP, just enter the 00:00:00:00:00:00 in the MAC

address field to reset it.

 Click Confirm to add this wireless AP.