User guide

X7968 Basic Settings
1. Introduction
The factory default configuration of the X7968 ADSL router should be suitable
for most users, to connect to internet after following the instructions given in the
“User guide” document. Nevertheless it could happen that the user requires
special configuration of the router in order to allow specific applications to run
properly (mainly online games and alike).
For those basic operational modes or configurations, the included software tool
(Agente ADSL) is the easiest way to accomplish the desired settings when the
user’s computer O.S. is Windows (2000, XP or Vista) and is the recommended
procedure. Only experienced users or those not using Windows O.S. should
use the Web GUI procedures explained in this manual.
WARNING: Telefonica de España can not be held responsible for
the device configuration using this manual. The present manual is
sole responsibility of Amper/Xavi.
X7968 ADSL router has a built in web GUI that allows complete configuration
for all of its features. Based on these web pages, it will be shown examples how
to accomplish each operational mode
Firstly on the search web, access home page of the router’s GUI, using a web
browser and pointing it to http://192.168.1.1. A popup window will come up to
ask for user’s name and password. The default value for both is “1234”. Click to
“Accept” button.
Once introduced, the home page will be shown. If it is not shown please verify
that your PC’s IP address belongs to the router’s IP subnet (192.168.1.1).
Eventually you could require to reset to default conditions by means of the
RESET button on the rear (see Annex in the User Manual).
1