User guide

X7968 Basic Settings

• Click “Apply”. Once you click there will be no response from the router

web GUI because the IP address of the router has changed.

Nevertheless, the new configuration is already saved in the router.

• Now, you must configure TCP/IP settings on your PC. The IP address

and mask should be the “public” IP address and mask provided by

Telefonica. For the gateway IP address you must use the IP address just

given to the router (see previous page). You also must configure DNS

servers on TCP/IP settings according to the information provided by

Telefonica. For a reference on how to do this please refer to “User

manual” under “Ayuda” folder.

• Once the PC is configured with new TCP/IP settings please check that

you can reach the router again at the new address (80.33.22.1 in this

example).

Last step requires the configuration of a default route in the router. Please

follow exactly the same approach explained in page 3.2 section.