User guide

X7968 Basic Settings
• Fill in the textboxes:
o IP Address: 0.0.0.0
o Netmask: 0.0.0.0
• Choose “Interface” and select the interface name defined previously (i.e.
“rfc” )
• Click “Apply” and verify that the default route just configured is shown
there.
The management of the IP addresses for the internal computers can be done
by the router using the built in DHCP server (this is default configuration) or,
manually by the user. You can learn how to configure and disable the DHCP
server in the appendix and in the User’s manual included in the CDROM.
13