Shared, life is more Wireless USB Adapter Unlimited convenience.
Introduction This guide explains the process of installing and configuring the Movistar wireless USB Adapter. This is a dual band adapter, i.e. it will allow you to connect to wireless networks on bandwidths of 2.4 GHz and 5 GHz. Please follow the step-by-step instructions. You will find more detailed information in the user manual included on the installation CD, by selecting the "View Documentation" option from the disk's automatic menu, or in the "Documentation" folder of the CD.
Box Contents (1) Wireless USB Adapter (2) Base (3) Installation CD (4) Installation Guide More information in the user manual: Chapter 2 3
Installation If you have previously installed a Wireless USB Adapter you will have to uninstall it before you start to install your new Movistar Wireless USB Adapter. Check that your Wireless USB Adapter is not still connected to the computer 1. Insert the Installation CD provided with your device. The CD menu will launch automatically. On Windows 7 and Vista a screen will appear requesting confirmation to run the application. Select "Allow" to continue with the installation.
3. The installation process for your adapter will begin. Next, follow the step-by-step instructions provided throughout the installation process. 4. Connect your Movistar Wireless USB Adapter to a free USB port on your computer. Next, click "OK" 5. Click "Finish" and your PC will restart (recommended). The adapter and utility will now be installed on your computer.
Configuration Before you set up the connection of your Wireless USB Adapter to a wireless network: 1. Ensure that the wireless network light on your router or access point is activated. 2. Check that you have the network name (SSID) and wireless security key to set up the connection. You can find these details on the label on the bottom of your router or, if they have been modified, check the configuration corresponding to your router.
2. If you have not modified the manufacturer's wireless configuration for your router, enter the security key shown on the label on the bottom of your router as shown in figure 7.2. fig. 7.1 If you have modified the wireless configuration, enter the customized values if required. Next, click "Accept". fig. 7.
3. To complete the process, a message will be displayed, confirming that the connection has been established correctly. If your computer has Windows, you will need to restart it so that the utility installs correctly and you can start to enjoy your Wireless USB Adapter. Congratulations! You have completed the installation and configuration of your Wireless USB Adapter.
Customer Service Customer service is available over the telephone and online. For more information, refer to chapter 9 of the user manual. http://www.movistar.
Troubleshooting for Common Problems Problem Windows does not recognize the USB adapter correctly after connecting it, or the link activity LED indicator is not illuminated. Cause Solution It is not correctly installed or connected. Adapter disabled. The USB port is damaged. Uninstall the utility and reinstall. Connect the adapter to another USB port. Refer to the section on "Checking the controller status" in point 7 of the user manual.If the problem persists, restart the computer. Launch the utility.
Problem Cause The router cannot be connected. The router is disabled or is out of range. The security key or name of the configured network (SSID) is incorrect. The TCP/IP configuration is incorrect. Check that the router is switched on and enabled and that the network is available. Check that you have entered the security key and the network name (SSID) correctly (bear in mind that they are case-sensitive). Check the TCP/IP configuration*. The connection signal is weak or unstable.
Environmental recycling Never dispose of the Wireless USB Adapter with your household waste. Ask your municipal authorities about different methods for disposing of the equipment in an environmentally-friendly manner. Always comply with the relevant current regulations. Offenders will be subjected to the penalties and measures laid down by the law.
Telefonica España, SAU, Gran Vía 28, Companies Register: Page M- 213180, Sheet 6, Volume 13170, Entry 1a, Tax ID No.: A-82018474.
Declaration of Conformity We hereby declare under our sole responsibility that the product: Product Name: N900 WNDA4100 Wireless Dual Band USB Adapter Brand: Movistar Manufacturer: NETGEAR Incorporated, Country of Manufacture: China Address: 350 East Plumeria Drive, San Jose CA 95134 Tax ID No.: W4003396A Model: WNDA410.0 Tel.
Glossary WPS (Wi-Fi Protected Setup): Simple method of wireless configuration. DHCP Protocol that allows devices in a network to automatically obtain IP configuration settings. Wireless security key: 802.11n Encryption code for the wireless network, which protects the connection against possible fraudulent use. Modification of the IEEE 802.11n-2007 standard in order to significantly improve network performance beyond previous SSID (Service Set Identifier) standards.
Shared, life is more Find out more on: 1004 (from a cell or landline) www.movistar.es Your Movistar Stores Version 1.0 Device supplied by: Tax ID No.: W4003396A National Electrical and Electronic Equipment Producers Registration No.
