User`s manual

User’s Guide Configuring your Computers
167
Fields on the
first setting
block
Description
Outgoing Default
Action
Specify the default action on the LAN to WAN
forwarding path.
Incoming Default
Action
Specify the default action on the WAN to LAN
forwarding path.
Function Button
Description
Apply Changes
Click to save the setting of default actions to the
configuration.
Fields on the
second setting
block
Description
Rule Action
Deny or allow traffic when matching this rule.
Direction
Traffic forwarding direction.
Protocol
There are 3 options available: TCP, UDP and ICMP.
Source IP
Address
The source IP address assigned to the traffic on which
filtering is applied.
Source Subnet
Mask
Subnet-mask of the source IP.
Source Port
Starting and ending source port numbers.
Destination IP
Address
The destination IP address assigned to the traffic on
which filtering is applied.
Destination
Subnet Mask
Subnet-mask of the destination IP.
Destination Port
Starting and ending destination port numbers.
Function Button
Description
Apply Changes
Click to save the rule entry to the configuration.
Delete Selected
Delete selected filtering rules from the filter table. You
can click the checkbox at the Select column to select
the filtering rule.
Delete All
Delete all filtering rules from the filter table.