User`s guide

9
Connect the yellow Ethernet cable (4) to
the Ethernet card on the PC and to one of
the router’s connectors labeled as Eth1 to
Eth4.
Switch the PC on. The ETHERNET
indicator will light up in green after a few
seconds. This led will blink when transfe-
rring data.
B. Connection using Ethernet cable
DSL Eth1 Eth2 Eth3 Eth4
DSL Eth1 Eth2 Eth3 Eth4
4
4
ResetUSB Wifi/WPS
ON/OFF
12V 1A
ResetUSB Wifi/WPS
ON/OFF
12V 1A
Power
3G
DSL Internet
Ethernet
1
2 3
4
For further information please refer to section 3.3 of the user’s manual on the documentation CD.