User`s guide

5
3. Switching on the router
Turn the router on by putting the switch into the ON position. Wait for a few minutes until
the LEDs shine as shown below.
Indicator Current status Description
Power ON (green) Status of the power supply.
Ethernet 1-4 OFF Status of Ethernet connection.
Wifi ON (green) Status of wireless network.
DSL ON (green)
Connectivity established with the exchange.
It will flash in green while the connection is been established.
Internet ON (green)
Status of Internet conection.
It will flash in green while there were traffic.
3G OFF For future use.
ON
OFF
Power
3G
DSL Internet
Ethernet
1
2 3
4
The routers provided by Movistar are optimised so that they can establish the connec-
tion with Internet without any need for installations or configurations.
Power
3G
DSL Internet
Ethernet
1
2 3
4
Movistar can make a remote update of your equipment to offer you a better service.
During this update proccess the power, Ethernet, DSL, and 3G indicators will flash in green
while Wifi indicator will flash in orange, and Internet indicator will flash in red.
Warning: Don’t turn off your Home Station VDSL2 while it is upgrading
because it could damage your equipment.
After about 6-8 minutes the power indi-
cator (the first one from the left) will light
up in fixed green indicating the end of the
process.
For further information please refer to section 3.4 of the user’s manual on the documentation CD.