Home Station VDSL2 Libertad en una caja.
This guide details about the start up process for your Internet connection. You will be able to enjoy your connection in an easy, simple and quick way. Please follow the guide instructions step by step. Documentation CD includes a video file in electronic format with detail graphical explanation about the start up process for your Internet connection (Ayuda-Grafica.exe).
Start using your VDSL... 1. Telephone line connection Connect the grey telephony line cable ( 3) to the telephone line socket and to the connector of the Home Station VDSL2 labeled as DSL. 12V DSL Eth1 Eth2 Eth3 Eth4 USB 1A Reset ON/OFF Wifi/WPS 3 DSL 2. Power adapter connection Plug the power adapter ( 2) into the mains supply and into the 12V 1A connector of the Home Station VDSL2.
3. Switching on the router ON OFF Power 1 2 3 Ethernet DSL 4 Internet 3G Turn the router on by putting the switch into the ON position. Wait for a few minutes until the LEDs shine as shown below. Indicator Current status Description Power ON (green) Status of the power supply. Ethernet 1-4 OFF Status of Ethernet connection. Wifi ON (green) Status of wireless network. DSL ON (green) Connectivity established with the exchange.
Start using your VDSL... 4. Connecting the computer to the router. Two options are available You may either connect your computer to the router using an Ethernet cable if they are sufficiently close to each other or by means of a wireless network. Furthermore, you can simultaneously have certain items of equipment connected to the router using the Ethernet cable and others as portable through the wireless network. A.
If you are equipped with an external wireless device (PCMCIA or USB adapter), install it with the aid of the CD that is provided with it. If you have a wireless device that is already integrated into your equipment, make sure that it is enabled with the aid of your operating system. Connection using WPS The router can use WPS for setting up a secure wireless network. Your wireless client device must support WPS for using it. Otherwise, use the method explained in “Connection using Windows wireless client”.
Search the available wireless networks. You can update this list with the button “Refresh network list” or by clicking the button Select the network whose identifier (SSID) is the one that appears on the router label and press on Connect. IMPORTANT. The wireless security key for the router is of the WPA/PSK type and its format is alphanumerical. Make sure you enter that security key exactly as it appears on the label. Connect to the wireless network (to do this, use the Connect or OK button).
B. Connection using Ethernet cable Connect the yellow Ethernet cable (4) to the Ethernet card on the PC and to one of the router’s connectors labeled as Eth1 to Eth4. 4 12V DSL Eth1 4 Eth2 Eth3 Eth4 USB 1A Reset ON/OFF Wifi/WPS 12V DSL Eth1 Eth2 Eth3 USB Eth4 Reset 1A ON/OFF Wifi/WPS Switch the PC on. The ETHERNET indicator will light up in green after a few seconds. This led will blink when transferring data.
Congratulations, now you can access Internet using your VDSL ! Open your browser, go to the web address www.movistar.es and start surfing the net. Should you not be able to access, please see refer to the Solutions to frequent problems in this guide. Activate your free e-mail accounts and your website with the Internet access service contracted. Once you have accessed www.movistar.es, you can activate your mail account.
Advanced configuration options There are some ways to carry out some advanced configuration task: • By the Remote configuration portal (1) accesing from: www.movistar.es/configuramirouter • Through the device’s Movistar web portal accesing from the Internet browser pointing to the device’s ip address, by default it will be http://192.168.1.1 Further information about native web configurator and Remote configuration portal please refer to the guides on the documentation CD.
Solutions to frequent problems Problem Reason Solution The Ethernet led does not light up. The Ethernet cable is not correctly connected. (This is only a problem if you have decided to connect by cable and not by wireless network). Verify that the Ethernet cable is correctly connected to the Ethernet connector and to the Ethernet card of your desktop PC or laptop computer (See Step 4 in the section “Start using your VDSL... ” in this guide). The DSL led does not light up.
Solutions to frequent problems Problem I cannot connect to the VDSL router wireless network. The connection with the wireless network is cut off frequently. The quality of the connection is not good. Reason Solution Your network identifier (SSID) is not being correctly indicated when you connect to it. Check to make sure that you are using the same network identifier (SSID) throughout the network. Remember that it is case sensitive, i.e. a distinction is made between capital and small letters.
Customer care The customer care service is available via telephone as well as via Internet. For further information, please refer to chapter 6 in the user’s manual. All the information about VDSL can be found in the “Internet” section at movistar.es: www.movistar.es/adsl/descarga and search in the VDSL section of your equipment.
Additional information Telefónica de España, S.A.U. informs We thank you the trust to have acquired a Movistar product and we inform you that for any clarification, query or complaint, you can call for free: • Personal care line (1004) • Care center for professional and business (900 10 10 10) • Business care center (900 12 09 00) Where you will be attended by our consultants or, if you prefere, visit Movistar web page: www.movistar.
DECLARATION OF CONFORMITY Company Name: ZyXEL Communications, S.A. C/ Arte, 21, 5th floor Address: 28033 Madrid Phone: 902195420 Fax: 913005345 Identification Number (CIF): A-62475710 Declares under its own responsability that the Device Type: Router Manufactured by: ZyXEL Communications Corp. In : Taiwán Brand: Telefónica Model: Home Station VDSL2 P8701T Complying with the standards listed below: ITU.T G.993.1 VDSL1 ITU.T G.993.
Glossary Antivirus: An application that detects and removes any computer virus and other malicious programs. DHCP (Dynamic Host Configuration Protocol): A protocol that allows the hosts of a network to obtain the IP configuration settings automatically. DNS (Domain Name System): Domain Name Server. The server translates a domain name (the name of a machine) into its corresponding IP address.
Glossary is available and the mechanism for retrieving it. The best-known example of the use of URLs is for the addresses of web pages on Internet, such as: http://www.movistar.es Web browser or web explorer: It is an application that enables the user to access and view hypertext document, commonly in HTML format, that is available on the Internet. Web space: It is a service that enables the user to offer his or her own web sites or documents so that they will be accessible on the Internet.
For getting further information: 1004 +34 699 991 004 Your Movistar shop www.movistar.es Version: 1.0 20 Equipment supplied by: C.I.F.
