Installation guide
7
After switching on the router, you will see the following activity
on the LED indicators:
• The Power LED indicator will start ashing in red and
green, indicating that the “Home Station Fibra Óptica” is
initialising. Once the process is completed, the LED will
indicate a constant green light.
• TheInternetLEDwillshowtheInternetconnectionsta-
tus. When there is no Internet connection, the LED will
be off. If it lights up red, it means that the configuration
is incorrect and connection to the Internet is therefore
impossible. If it lights up green, this means that there is
an Internet connection through the ONT.
• TheBroadbandLEDindicateswhetherthereisanyacti-
vity on the interface labelled Internet, i.e. the WAN.
• TheEthernetLEDashesgreenifthereisactivityonthe
Eth. 1 – Eth.2 - Eth. 3 – Eth.4 switches.
• TheWirelessLEDwilllightupgreenifthewirelessinter-
faceison.Itwillalsoashwhenthereisanyactivityon
this interface.
• TheUSBLEDshowsifthereisactivityontheUSBcon-
nection.
Movistar may at any point, particularly after initial installation,
automatically and remotely execute software updating on your
device thus providing a better service. During this process the
PowerLEDlocatedonthefrontpanelwillashingreen.