Operation Manual

Fixed dial
If the SIM card supports this function, you can set the certain dialing then you can only dial
the number on the list.
Enter “fixed dial”, you can set:
Format: open/close this function (PIN2 code is needed).
The list: input the numbers.
Note: to open/close this function, the PIN2 code is needed. Please contact with your
operator to get it.
Barred dial: set the numbers you can not dial.
Phone lock
You can lock the handset to avoid being illegally used.
You have to input the handset password each time you power on the handset.
Note: The default password is 1234; please change it to your personal password as soon
as possible.
Auto keypad lock
Set the waiting time for locking keypad. After setting, the keypad will be locked
automatically .
Change the password: including PIN, PIN2 code and the password of the handset lock.
Note: some functions need the support of the operator.
10.5 Call settings
10.5.1 SIM call settings
Call waiting: open or close this function
Call divert
Call barring
Line switch: line switch form 1 to 2. The default is line 1.
10.5.2 SIM call settings
The detail is referred to SIM1 call settings.
Call time reminder: you can choose off, Single, Periodic, when you are calling that can
remind you by a voice.
Auto redial: when you set this function, each time you fail to get through, it will redial
automatically.
Black list
Mode: on/off
Black list numbers: you can edit black numbers.
IP dial: enter IP number and press OK to confirm the settings, and then you can cancel or
edit it.
10.6 Restore factory settings
Input the password of the handset lock, you can set the parameter to factory default.