User Manual

Q6
3
the corresponding password when next time connecting to the previously encrypted wireless
network. Wi-Fi will search automatically, that is, phone needn’t to perform additional steps to connect
Wi-Fi networks.
 Notices：
Unless you choose not to reserve the network with password, otherwise, there is no need to re-enter
the corresponding password when next time connecting to the previously encrypted wireless
network. Wi-Fi will search automatically, that is, phone needn’t to perform additional steps to connect
Wi-Fi networks.
 Connect to other Wi-Fi networks
1) In the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will
show on the Wi-Fi network list.
2) Touch other Wi-Fi networks, and then you can connect to this network.
 Notices：in addition, you can surf the internet via GPRS. We default
that the GPRS in SIM1 is opened after started, users can select manually ,the
specific location is “settings>wireless and internet>data connection”， touch
“SIM1、SIN2、no data connection”， when the dot turns green, it’s already
opened.
4. Bluetooth
Turn on Bluetooth or set the phone can be detected
1) Press home>menu, the touch settings.
2) Touch wireless and internet, then choose Bluetooth box to open the Bluetooth function.
After started, the status box will show this icon ( ). Touch “scan for devices”the it starts to scan for all
devices within range.
3) Touch Bluetooth settings, all the devices founded will display in the
list under the icon.
（select the box “can be detected”, set it to be detected, the other
Bluetooth devices will be able to find the phone.）
important：the maximum detecting time of the phone is 2 minutes.
 Pairing and connection of Bluetooth headset
1) Press home>menu, then touch settings.
2)Touch wireless and internet>Bluetooth settings, then select Bluetooth box,
then your phone will scan for the Bluetooth devices within range ,and show
the founded devices in the list under the icon.
 Tips：
a. If the list can’t find your equipment, touch scanning equipment to
re-scan it.
b. Make sure that the devices wanted are under the detected mode.
3) Touch headset in the equipment list to finish the connection.
 Notices：generally Bluetooth devices need password to be paired, often
use「0000」as the default password.4)The pairing and connecting status will
show under the headset in the Bluetooth devices list. When the headset
connected to your phone, the status box will show this icon（ ）means
connected. Then you can use the headset to make or receive callings..
 Cut the connection to the Bluetooth
1) Press home>menu>settings>wireless and internet>Bluetooth settings.