User Manual

Q6
2
Camera
the front camera can photo yourself.
LED Light
 Display mobile phone status and prompt unread
messages
2. Using Memory Card as U Disk
If you want to send music, pictures or other files to the phone’s memory card from the
computer，you should set memory card as u disk first.
Set memory card as u disk
1) Connect the phone to the computer with USB cable. The notification icon
will appear in the status box.
2) Open the notification panel.
3) In the notification panel, touch USB is connected ，then touch“Open the
USB Storage Device”.
 Notices：If you connect your phone to the computer then choose open the USB device,
the phone can’t read the memory card. You temporarily can not use some applications, such as
camera.
 Uninstall the U Disk from computer
The same as the method of connecting it，see the following picture:
3. Wifi
Wi-Fi provides as far as 300feet (100M) range of wireless network access. If you use cell phone to
connect wifi, you should connect to the wireless access point or 「hot spots」.
 Notices：The availability and coverage of Wi-Fi signal depend on the
number, infrastructure and other objects penetrated by the signal.
Open Wi-fi and to connect to the wireless network
1) Press home>menu，then touch settings>wifi and internet
2) Select the wi-fi box，to open Wi-Fi. Phone will automatically scan for available wireless networks.
3) Touch Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and
security settings. (open network or WEP、WPA/WPA2 with password).If you enable the notification in
Wi-Fi settings, The status box will show this icon ( ) when open available wireless network
founded.
4) Touch one of the Wi-Fi choices to connect the network. When you
choose open network, phone will connect to it automatically. If you choose
WEP、WPA/WPA2 with password, you should type the password first, then
touch to connect it.
 Notices：when the phone is connected to the wireless network,
The status box will show this Wi-Fi icon（ ）, and the approximate
signal strengthen (the number of lit bars).If touch the connected
network，will display the name of Wi—Fi network, status, speed, signal,
strength, security, information and IP address.
If you want to delete the wireless settings, please touch “not reserve”
as in the right picture. If you want to connect to this network, you
should re-enter these settings.
 Notices：
Unless you choose not to reserve the network, otherwise, there is no need to re-enter