User`s guide

__--_
__.*
-_
-
New CF memory cards must be partitioned and formatted prior to usek
Partitioning CF memory card
You can partition a CF memory card jusP-‘as any other hard disk drive.
Important: You must create a Primary DOS Partition!
To partition:
l Caution: All data on CF memory card may be lost after partitioning!
l Partitioning requires running a command prompt program called ‘fdisk’. Go
into MS-DOS (command prompt) mode by:
- Press Start c3 Programs c3 MS-DOS Prompt
- A window ‘MS-DOS Prompt’with command prompt ‘C:\WINDOWS9will
appear
- type ‘fdisk’ <Enter>
- Do you wish to enable large disk support (Y/N)......? [Y] <Enter>
- Important: You must change the current fixed disk drive to
drive number representing the CF memory card!
Below example assumes 1 hard disk drive is installed in the system
and the CF memory card is the 2nd drive in the system! Make sure
after changing the drive the ‘fdisk’ - program will display ‘Current
fixed disk drive: 2’! Don’t continue if you are not sure about these
instructions. Mistake will result in loss of all data!
- Enter Fixed Disk Drive Number (l-2) . . . . . . [2] <Enter>
- Create DOS partition or Logical DOS Drive / Enter choice: [I] <Enter>
- Create Primary DOS Partition / Enter choice: [I] <Enter>
- Do you wish to use the maximum available size for a Primary DOS
partition (Y/N). . . ...? [Y] <Enter>
- Press Esc to exit FDISK <ES0
- Press Esc to exit FDISK <ES0
- Press Esc to exit FDISK <ES0
- Now you have to restart the computer to effect the changes to your
system.
Formatting CF memory card
You can format a CF memory card just as any other hard disk drive or floppy disk.
To format:
l Caution: All data on CF memory card may be lost after formatting!
l In ‘Explore’ highlight drive letter representing CF memory card
l Right click within highlighted area and select ‘Format’
l Left click on ‘Format’
l Make relevant choice of ‘Format type’ and ‘Other options’ as desired
l Click ‘Start’ button
12