User's Manual

Gyration, Inc.
Page 7 of 7
The physical plastic contains a hole for a connect button but can be covered with a
product label if a proximity bind configuration is desired, thus saving the need for
different plastic parts based on the bind algorithm chosen.
4.5 Multiple transceivers in a system
When multiple transceivers are installed by plugging them into different USB slots of the
same computer, the following operation is noticed.
When both transceivers are proximity-bind transceivers:
When a proximity bind is attempted by moving 1 “proximity-bind enabled controller”
(like a remote control) close to the computer, that controller may bind to any of the
transceivers. The proximity bind algorithm relies on the controller and transceiver to be in
close proximity and a bind process would be started with the closest combination at that
time, and maybe wont be the pair desired. To prevent this, only 1 proximity-bind receiver
should be installed in the computer at a time while doing the bind sequence.
When in a Dell XPS2010 system (Greenland with an internal daughter card)
TBD
4.6 Compatibility matrix with Gyration products
This is a matrix that describes the compatibility of this proximity-bind RF-only transceiver
with all other Gyration products.
TBD
Gyration Go Mouse
Gyration Go Mobile keyboard
Gyration Go Full size keyboard
Gyration Media Center Universal Remote Control
Gyration GyroTransport
Gyration GyroTools software application
Dell MusicLCD Remote (RMT5)
Dell internal daughter card (Orc)