User's Manual

Gyration, Inc.
Page 13 of 13
10 Packaging Requirements
10.1 Bulk Packaging Requirement
Manufacturer must propose design of bulk packaging for product. Design of bulk
packaging must be approved by Gyration, and must pass 10.2 - Bulk Packaging
Qualification Testing.
10.2 Bulk Packaging Qualification Testing
The design for Bulk Packaging Cartons should be qualified by the manufacturer by the
following method: Each carton should be subjected to a six side/four corner drop test (1
meter) with no product damage. Manufacturer must provide report of qualification test
to Gyration.
Cartons will be designed to withstand normal banding or strapping without damage
when a band or strap is positioned at the midpoint of a longest edge. Minimum sample
size for Bulk Packaging Testing is 5 cartons.
Bulk packaging diagram to be placed here