User's Manual

Gyration, Inc.
Page 12 of 12
8 Compliance
The transceiver will comply with the following agencies and standards:
Agency or Standard Reference
FCC (US) 15.247 (2400-2483.5)
IC (Canada) RSS-210
CE (European Community) EN 301 489-17 Emissions & Immunity
EN 300 328 wireless testing
EN 60950 Safety
RoHS Will be independently verified
OTHER STANDARDS TO BE DETERMINED AT A LATER TIME
Telec (Japan) Japan Wireless Device
Australia / New Zealand EMC
Singapore Singapore Approval
9 Testing
9.1 Qualification / Reliability Testing
Any changes in design or selection of parts or component, or new design release, will
require a qualification test with units built using finished (tooled) parts prior to placing in
production. Tests will confirm that product will conform to performance and reliability
requirements outlined in this specification. Minimum sample size is 10 units.
Manufacturer must provide report of qualification /reliability test to Gyration.
9.2 Production Testing
Each unit is to be tested during the build process according to the applicable specification,
approved by Gyration. Only units that conform to this document are shippable product.
9.3 Lot Sampling Testing
Lot sampling testing must be performed at the manufacturer according to the applicable
specification, approved by Gyration, prior to shipment. Lot Sampling Testing will form
the basis for acceptance or rejection of production lots.