User's Manual

V. GET FAMILIAR WITH MOTIONPOD™

Please take a moment to familiarize with the different components of your measuring system. For

the following section it is advised to refer to the material scheme II.

1. MOTIONPOD™

MOTIONPOD™ is standard wristwatch-sized sensor with a transparent casing that embodies the

Motion sensing component on the upper side (Figure 3). It is intended to be worn on the moving

part of the body where we want to perform joint assessment. It must be fixed mechanically by

means of straps or bracelets (not provided) via the black colored mechanical interface.

Photo of MotionPod™

Mechanical interface for bracelet or

strap

Side view of MOTIONPOD™ scheme

Mechanical fixing base

FIGURE 3 : MOTIONPOD™

On the top of MOTIONPOD™ you can see an ellipse shaped facet: it is the antenna with an imprinted

name and logo of the manufacturer (Movea, Motion is Life), the brand name of the product

(MotionPod) and an arrow pointing towards the button located on the side of the casing. The arrow