User Manual

9
Setting up the beacons
The watch is located by the beacons thanks to triangulation techniques which is why the beacons are essential both
INDOOR and OUTDOOR.
Afterscrewingthebeaconsonthemini-tripods,switchONeachbeaconbypressingitsbutton until the green light
turnsON.
PlacethePIXIOrobotandthe3beaconsaroundtheareayouwanttolmfollowingtheseinstructions:
 -Place the beacon n°1 as far as possible from the robot (butnotmorethan330ft or100m).Itwill
improvetheleft-rightaccuracyofthetracking(beacon numbers are written at the back of each beacon).
 -Place the beacons n°2 on the left of the beacon n°1, as seen from the robot.
 -Thebeaconn°3canbeplacedontheleftorontherightofotherbeacons.
2
3
1
The beacon n°2 is on the
left of the beacon n°1, as
seenfromtherobot
Thebeacon n°1 is placed
asfaraspossiblefromthe
robot
2
3
1