User Manual

8
Setting up the PIXIO
1.Screwtherobotonatripodequippedwithastandard3/8’’screw(check that
the motor is switched off before screwing or unscrewing the device).
2.Screwyourcamera,DSLR,smartphone/tabletadaptortotherobotwiththe
1/4’’screwofthePIXIOrobot.
3.Ifyouareusingasupportedmodelofcamera,plugthecameraandtherobot
with the correct cable. There are 3 cable models depending on the camera
model:
AMULTIcableissuppliedwithyoursystem.YoucanorderanAV/Rand/oraJack
2,5mmcableathttps://shop.movensee.com/
3
BeforeusingPIXIOforthersttime,youmustcheckthatthermwareofthePIXIO
isuptodate(referpage30),andcheckthatthecameraparameterskeptin
thememoryoftherobotmatchesyourcameramodel(referpage32).
NOTICE
1
2
3
MULTIcable AV/Rcable JackØ2.5mmcable