User Manual

32
Configuring your PIXIO to work with your own CAMERA
Bydefault,yourPIXIOisconguredtoworkwithaSONYHDR-CX450camera.Followtheseinstructionsto
updatethecameraparameterskeptinthememoryoftherobot.
First,downloadthelecorrespondingtoyourcameramodelathttps://shop.movensee.com/ccc.Thele
ismeanttobeopeneddirectlyonandbyPIXIOrobotsodonotopentheledirectlyfromyourcomputer.
RecordthePIXCAM.cfgleonamicro-SDcardformattedwiththeFAT32,FAT16orFAT12format(usually,
micro-SD cards with a capacity lower than 32Gb are formatted with a correct format). The lemustbe
savedintherootdirectoryofthememorycard,notinasub-directory.Thisleismeanttobeopeneddirectly
onandbyPIXIO(donottrytoopenitfromyourcomputer).
CheckthatthenameoftheleisPIXCAM.cfgwithoutany...(1)or...(2)attheend
ofthename.Ifneeded,renamethelePIXCAM.cfg
Insert the micro-SD card in the robot slot. Switch ON the robot (do not
press any other button than the switch ON button). A few quick ashes of
the LEDs occur, and the le has disappeared from the micro SD card. The
parameters of the robot have been updated and stored in its memory.
ThemicroSDcardgoes
intotherobotslot