User guide

PAIRING YOUR DEVICE

6 PAIRING YOUR DEVICE

1. Make sure mc.brick is fully charged.

2. ActivateBluetooth on your Bluetooth device (mobile phone, tablet, portable gaming,

MP3/MP4 players, laptops, desktops). Bluetooth controls are typically found in the tools or

settings menu.Turn on Bluetooth connectivity and make sure your device is "visible" or

"discoverable". Important: for more information about how to enable Bluetooth on your

device, please refer to the user guide provided by the manufacturer of this device.

3. Turn on mc.brick by switching the button on the back of the speaker to "On".

4. After turning on mc.brick, the LED lights should alternate between shining red and blue.

This signal that the speaker is in "pairing mode".

5. Choose "add new Bluetooth device" or "setup Bluetooth device" on your device. It will

search for mc.brick.

6. As your Bluetooth device discovers possible items to connect to, it will list their names.

Select the device named mc.brick. This will connect your speaker to your Bluetooth device.

7. If the pairing attempt fails or times out (roughly 3 minutes), restart both devices and start

the pairing process again (steps 2 to 6).

8. Once paired successfully, the LED indicator lights will turn blue and blink twice every 3

seconds.

9. Enjoy your mc.brick and your music wirelessly anywhere now!

7 USING THE LINE-IN AUDIO JACK

If your device is not Bluetooth enabled, you can still enjoy your mc.brick by using the Line-in

Audio Jack and by connecting mc.brick with the included audio jack cable to any device with a

3.5MM standard audio jack. Once done, mc.brick can be used as a wired speaker.

Important: the PLAY/PAUSE, PREVIOUS & NEXT buttons only work when connected

wirelessly via Bluetooth. In case of wired connection, music can only be controlled on your

device.

Your mc.brick can still be connected to Bluetooth devices when the speaker is playing from

Line-in audio. The TALK/SIRI buttons still work if there is Bluetooth connection and, the

VOLUME UP and VOLUME DOWN buttons also work when mc.brick is playing from Line-in

audio.