User guide

CHARGING YOUR SPEAKER

4 CHARGING YOUR SPEAKER

Before the first use or when the battery runs out, please charge mc.brick with the Micro USB

charging cable included in the package.

Plug the small Micro USB pin into the charging port on the back of the speaker, and plug the

other end of the cable (the standard USB 2.0) into the USB port of a computer.

You can also charge your mc.brick with an official Mova Systems USB power adapter (available

separately), or with other third-party "Made for mc.brick" cables and power adapters that are

compatible with USB 2.0, or power adapters compliant with one or more of the following

standards: EN 301489-34, IEC 62684, YD/T 1591-2009, CNS 15285, ITU L.1000, or another

applicable Bluetooth speaker power adapter interoperability standard. In this case, please then

plug the USB charger to a power outlet.

WARNING For important safety information about the battery and charging mc.brick, see

Important safety information on page 7.

Using an inadequate third party charger could result in electric shock and could also damage

mc.brick.

The LED indicator light will turn red when it is being charged. When it is fully charged, the LED

indicator light will go off. A full charge takes about 3-4 hours.

Your mc.brick can be charged while working. The battery of mc.brick will be charged till the

charging process completes. Your mc.brick will be powered by the DC input directly and the

battery will be in sleep mode after it is fully charged.

Important: mc.brick battery may drain instead of charge, if mc.brick is connected to a

computer that’s turned off or is in sleep or standby mode.

5 BATTERY STATUS ON IPHONE AND IPAD

When mc.brick is connected to iPhone/iPad via Bluetooth, the battery status of mc.brick can be

displayed on the top of the iPhone/iPad screen, near the Bluetooth logo.

Please note that the battery status icon can be vertical or horizontal, depending on the

Bluetooth device and its operation system.