User Instructions
How To Safely And Best Use Your MagSafe Compatible Charger
• Ensure there are no metallic objects between the material top and your phone as this may interfere with
MagSafe compatible charging. If the foreign object detector does not activate, the device has the potential
to get very hot and burn the user or damage its surroundings.
• If you’re using an accessory with your phone case, for example a Mous Card Wallet, please remove it as it
may aect the charge performance.
• The magnetic array design ensures that you'll receive a well optimised charge every time. Ensure magnets
snap to position otherwise your mobile device may not charge properly.
• For best charging performance, we recommend you use a 20W power delivery wall adapter.
• For best results, use with a MagSafe compatible phone or phone case.
• If you are not using a MagSafe phone, you won't be able to achieve proper alignment
- you will need to ensure your phone is as central as possible to get the most ecient charge.
Important Safety Instructions - Warning
Read all instructions and warnings prior to using this product. Improper use of this product may result in
product damage, excess heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not
Mous Products Ltd. (“Manufacturer”) are responsible.
X Do not place metal objects between phone and charger as the charger may
get very hot.
X Do not use or store devices in high-temperature environments, including heat caused by intense sunlight or
other forms of heat, as this may reduce charge eciency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments. Exposure to fire or extremely high heat
may cause explosion.
X This product is fitted with magnets. Pacemaker and ICD users are advised not to position the MagSafe
Compatible Charger Mount within 20cm radius of their implanted device as it may cause interference.
X Do not expose the MagSafe Compatible Charger Mount to water. Exposure to water may result in short
circuiting. If short circuiting occurs immediately turn o at the wall.
X Do not use the MagSafe Compatible Charger Mount in excess of its output rating. Overloading outputs
above rating may result in a risk of fire or injury to persons.
X Do not disassemble this product or attempt to repurpose or modify it in any manner.
X Do not attempt to replace any part of this device. Any modification or disassemblement may result in a void
of warranty.
X Use of a power supply or charger not recommended by Mous may result in a risk of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the purchasing adult agrees to be solely responsible
for providing supervision, instruction, and warnings. Purchaser agrees to defend, indemnify, and hold
Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
X All products have gone through a thorough quality assurance inspection. If you find that your device is
excessively hot, is emitting odour, is deformed, abraded, cut, or is experiencing or demonstrating an
abnormal phenomenon, immediately stop all product use and contact Mous.
X Switch o the MagSafe Compatible Charger Mount when not in use.
X To disconnect the MagSafe Compatible Charger Mount from line voltage, pull the AC adapter from the AC
outlet.
X To comply with FCC RF exposure compliance requirements, the MagSafe Compatible Charger Mount must
be used with a separation distance of at least 20cm from all persons.
Legal
This product is meant for use only in conjunction with the appropriate device. Please consult your device
packaging to determine whether this product is compatible with your particular device. Manufacturer is not
responsible for any damages to any device incurred through the use of this product.
Manufacturer shall not in any way be liable to you or to any third party for any damages you or any third
party may suer as a result of use, intended or unintended, or misuse of this product in conjunction with any
device or accessory other than the appropriate device for which this product is designed. Manufacturer will
not be responsible for any damages you or any third party may suer as a result of misuse of this product as
outlined above. Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or
damages arising from unintended use or misuse, including use with an unintended device. Mous and
AutoAlignPlus are trademarks of Mous Products Ltd. Apple, AirPods and iPhone are trademarks of Apple Inc.
The trademark “iPhone” is used in Japan with a license from Aiphone K.K. All rights reserved.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected.
• Consult the dealer or an experienced technician for help.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface
of the device must be respected.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this
device must be used with certified peripherals and shielded cables. All peripherals must be shielded and
grounded. Operation with non-certified peripherals or non-shielded cables may result in interference to
radio or reception.
MODIFICATION: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Statement of Compliance
Mous declares that the radio equipment wireless charging base is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.mous.co
IC Statement
Radio Standards Specification RSS-Gen, issue 5 - English: This device contains license-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s
licence-exempt RSS(s). Operation is subject to the
following two conditions: - This device may not cause interference, - This device must accept any
interference, including interference that may cause undesired operation of the device.
RF Exposure Statement
The equipment complies with IC Radiation exposure limit set forth for uncontrolled environment. This
equipment should be installed and operated with minimum distance 10cm between the radiator and your
body.
UKCA Warning
This device was tested for fixed location. To comply with RF exposure requirements, a minimum separation
distance of 20cm must be maintained between the user’s body and the wireless charger, including the
antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided. Use only the supplied or an approved antenna.
UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other relevant provisions of UK Radio
Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK
Electromagnetic Compatibility Regulations (SI 2016/1091). All essential radio test suites have been carried
out.
Technology
Operating frequency range
Maximum field strength
Manufacturer
Manufacturer address
WEEE Declaration All of our products are marked with the WEEE symbol; this indicates that this product
must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste
electrical and electronic equipment by handing it over to an approved re-processor, or by returning it to
Mous for reprocessing. For more information about where you can send your waste equipment for recycling,
please visit www.mous.co
Warranty
At Mous, we are dedicated to making high quality products that last. To give you peace of mind, this product
is warranted for 2 years from the date of delivery. For full details regarding warranty terms and exclusions,
please visit: www.mous.co/warranty. This warranty does not aect any statutory rights that you may be
entitled to. Keep a copy of your purchase receipt as proof of purchase.
Customer Service
Need some extra help? Do get in touch with us at www.mous.co/pages/help