Operation Manual

BEFORE USING FOR THE FIRST TIME
1. REMOVE PACKAGING
• Take your appliance out of its packaging.
Keep your warranty card and carefully read
the operating instructions before using your
appliance for the first time.
2. HINTS AND PRECAUTIONS
• Before each use, the supply cord should be
completely unwound.
• Do not allow it to become trapped or
pulled over sharp edges.
• If you use an electric extension cord, make
sure that it is in perfect condition and
appropriate to the power rating of your
appliance.
• Never unplug the appliance by pulling on
the cord.
• Never operate the vacuum cleaner without a
bag and without a filtration system (cassettes).
• Do not use the vacuum cleaner without a
foam filter for protection of the motor.
• Only use Moulinex bags and filters.
• Always stop and unplug your appliance
before maintenance or cleaning.
• This appliance is not designed to be used
by people (including children) with a
physical, sensory or mental impairment,
or people without knowledge or
experience, unless they are supervised or
given prior instructions concerning the
use of the appliance by someone
responsible for their safety.
• Children must be supervised to ensure
that they do not play with the appliance.
USING THE APPLIANCE
1. ASSEMBLING THE ELEMENTS OF THE APPLIANCE
• Push the flexible hose (19) in the opening
(10) until your hear a clicking sound - fig.1.
To remove it, press the button of the hose
connector and pull - fig.2.
• Assemble the telescopic tube* (20). Adjust
it to the desired length - fig.3.
• Fit the appropriate accessory to the end
of the tube:
- For rugs and wall-to-wall carpeting: use the
head (23) with brushes lifted - fig.4.
- For parquets and smooth flooring: use the
nozzle (23) with the brush extended - fig.4.
or use the parquet nozzle* (22).
- For nooks and difficult-to-reach areas:
use the mini-brush convertible slotted
attachment* (25) in flat nozzle position.
- For furniture: use the mini-brush on the
convertible slotted attachment* (25) or the
furniture attachment* (24).
2. PLUGGING IN THE ELECTRICAL POWER
CORD AND USING THE VACUUM CLEANER
• Completely unwind the power cord, plug
in your vacuum cleaner - fig.5 and push
the on/off pedal (2) - fig. 6.
• Adjust the suction power:
-
With the electronic power selector (3) : Turn
the button of the electronic power
regulator to adjust the suction power: to
the max position for floors and to the min
position for furniture and delicate fabrics -
fig. 7.
- With the electronic power regulator on the
power nozzle: open the selector switch flap
to manually reduce suction power
regulator, ex: fragile surfaces… - fig. 8.
3. STORING AND TRANSPORTING THE APPLIANCE
• After use, stop your appliance by pressing
on the on/off pedal (2) and unplug it
- fig. 9.Replace the cable by pressing the
automatic cable rewind pedal
(4) - fig. 10.
• In an upright position, hook the telescopic
tube* (20) onto its storage position on the
back of the appliance (1b) - fig. 11.
• You can transport your vacuum cleaner
easily using its carrying handle (7).
• In the horizontal position, hook the floor
nozzle (23) onto its storage position at the
rear of the appliance (1a) - fig. 12.
10
NoticeZÉLIO 7/06/07 14:43 Page 10