Operation Manual

10
unit (A1) in position on the lid.
To dismantle your accessory after use,
remove the motor unit (A1) from the lid
(I4), remove the lid (I4) and the cover lid
(I3), then carefully remove the blade (I2)
(hold it by the plastic section) before
removing the meat or food with a spoon
or spatula.
5. Mini chopper 600 ml
(fig. 5 – according to model)
Carefully place the blade (F2) into the
bowl (F) along the central axis, holding it
by the plastic part as you do so.
Place the food in the bowl. Do not fill the
bowl (F) higher than the maximum limit.
Place the reducer lid (F3) in the bowl and
place the lid (F) on top ensuring that the
drive mechanism is properly positioned
on the blade. Set the motor unit (A1) in
position on the lid.
To dismantle your accessory after use,
remove the motor unit (A1) from the lid
(F3), remove the lid (F3) and the reducing
lid (F3), then carefully remove the blade
(F2) (hold it by the plastic section) before
removing the meat.
Do not put hard objects such as ice
cubes, sugar cubes or fruit stones in the
bowl.
6. 2L or 3.2L Multifunction bowl
(fig 2 - according to model)
The 2L multifunction bowl enables you to
prepare mixtures from 150 to 800 g.
The 3.2L multifunction bowl enables you
to prepare mixtures from 150 to 1000 g.
Do not put hard objects such as ice
cubes, sugar cubes or fruit stones in the
bowl.
Knead/Chop/Blend (fig 6)
Place the blade holder (E8) in the centre
of the bowl (E) on the axis. Carefully
place the blades (E4 or E5) on the blade
holder (E8). Place the reducer (E6) on the
lid (E3) in the slot designed to that effect.
Place the lid (E3) on the bowl (E) and lock
it. The feeder tube must be placed on the
same side of the bowl as the handle.
Set the motor unit (A1) in position on the
reducer (E6).
Turn on.
To dismantle, press the ejection button
(E7) to remove the motor unit (A1) from
the reducer (E6) before removing the lid
(E3).
Unlock (E7) the lid (E3) to access the food.
Remove the blade holder (E8) and the
blade (E4 or E5) before removing the
food. Then very carefully remove the
sharp blade (E4) from the blade holder
(E8), (hold it by the plastic section).
Knead (fig 6): Chopping knife (E4) for
the 2L multifunction bowl or
kneading blade (E5)
With this kneading blade you can make
a shortcrust pastry dough (250 g of flour
+ 150 g butter + 100 g of sugar + 1 egg
+ vanilla sugar + salt) in just 30
seconds.
Attention: Stop the appliance as soon as
dough begins to form a ball.
Chop (fig 6): Chopping Blade (E4)
In 15 to 20 seconds you can chop
between 150 and 850 g of food in the
3.2L multifunction bowl and from 150 to
300 g in the 2L model: hard foodstuffs
(cheeses, dried fruit), hard vegetables
(carrots, celery, etc.), tender vegetables
(onions, spinach, etc.), raw and cooked
meats (boned and chopped into chunks),
raw or cooked fish. Do not chop things
that are too hard (rice, sugar cubes) or
which require very fine chopping (wheat,
coffee).
Grate/slice (fig 7)
Blade G comes with some models of the range
nevertheless, if you wish to obtain this accessory, it
is available from our after sales service (see list of
approved centres enclosed) under the reference:
MS0695631.
Depending on the model, the detachable
blade holder (E9) may be replaced by a