Operation Manual

13
EN
concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• Do not allow children to use the mixing foot without
surveillance.
• Do not allow long hair, scarves, ties etc. to hang over
the appliance or attachment when either is in use.
• If your appliance "jams" during processing, switch it
off and check that the accessory used is not over-
loaded with ingredients. Carefully remove the ingre-
dients obstructing the blades.
• Your appliance is equipped with a device to protect
against overheating. If your appliance overheats, it
will switch itself off. Leave it to cool down for about
20 minutes then start using it again.
• Switch off the appliance and unplug it from the electri-
cal power supply before changing the accessories or
handling the parts which move when in operation.
• Before using your appliance for the first time, clean the accessories using warm
water and washing-up liquid. Rinse and dry them carefully.
• Ensure that your work top is stable and dry.
• Place the ingredients in a container that is tall enough to avoid splashing.
• Do not fill the jug (D) to more than 500 ml (18 fl oz) to avoid splashing.
• Mixer foot: FIG 2 - 4
- Screw the motor unit (A) onto the blender shaft (C) making sure that the motor
unit is properly and securely attached, then plug in the appliance. Fig. 2 and 3.
- Insert the shaft (C) in the beaker to mid-height Fig. 4, then press the Start But-
ton (B2) after having selected the desired speed by using the Speed dial (B1).
- Your device is equipped with a Turbo function that allows you to use it in full
power mode by pressing the corresponding button (B3).
USING THE APPLIANCE