Operation Manual

11
. to set the coffee maker to start up to 24 hours
in advance.
. to automatically stop the coffee maker after
2 hours (manual or automatic mode).
- Plug in the appliance: the timer display
flashes.
. Setting the clock
- Turn the selector (P) to position .
- Press the button «H» (M) to set the hour.
- Press the button «min» (N) to set the minu-
tes.
- Turn the selector back to «0»: the clock is
set.
. Functioning in manual mode
- Turn the selector (P) to position «I».
- The indicator light (O) will come on.
- Turn the selector (P) to position «0» to switch
the appliance off.
. Using the appliance in programming
mode
To set the time when you want to have your
coffee:
- Turn the selector (P) to position PROG: the
display symbol
will flash.
- Press the button «H» (M) to set the hour.
- Press the button «min» (N) to set the minu-
tes.
- Turn the selector (P) to position AUTO: the
display symbol
remains constant: your
coffee maker is now programmed.
- At the time which has been programmed,
the indicator light (O) will come on and the
coffee maker will automatically switch itself
on.
Please note: If the selector remains in AUTO
position, the coffee maker will start everyday
at the programmed time.
- Turn the selector (P) to position «0» to stop
the coffee maker.
Maintenance
. Changing the «Aqua Filter 3»:
- Change the cartridge when the cartridge-
change indicator (G) turns red.
This indicator tells you when it is time to
change the cartridge; it will stay red for 5
uses, and will then go back to white, whether
or not you have changed the cartridge.
- Remove the used cartridge by rotating it.
- Dispose of the used cartridge in the bin with
household waste.
- Take the new «Aqua Filter 3» out of its bag
and rinse it under the cold tap water for about
1 min.
- Fit the cartridge into its holder by rotating it.
Important:
- The «Aqua Filter 3» is only suitable for
Crystalys coffee makers.
- If you have not used your coffee maker for:
. more than one month: rinse the coffee maker
by running it through one cycle with fresh
water but no coffee.
. more than 3 months: change the «Aqua Filter
3» before use.
. Descaling
In order to guarantee good coffee for longer, it
is necessary to descale your coffee maker
every 80 cycles.
. To descale, you can use:
. either a sachet of descaler for coffee makers
which is first diluted in 2 large cups of water
(approx. 30 cl).
. or 2 large cups of white wine vinegar.
- Remove the «Aqua Filter 3» from the coffee
maker.
- Pour the mixture into the water tank (A) and
start the coffee maker (no coffee).
- Allow the equivalent of one cup to flow into
the jug, then turn off the coffee maker.
- Leave the mixture remaining in the coffee
maker to work for one hour.
- Restart the coffee maker to finish the cycle.
- Rinse the coffee maker out by running it
3 times with fresh water (8 cups).
- Replace the cartridge holder with a new
«Aqua Filter 3».
Please note: Never leave the sachet of
descaler where children can get hold of it.
This descaler contains chemicals, which are
not recommended to be ingested.
Cleaning
- Unplug the appliance.
- Do not place the coffee maker in water or
under running water.
- To dispose of the used coffee grounds,
remove the filter holder (B) from the coffee
maker.
- The coffee jug (F) and the removable filter
holder (B) can be washed in the dishwasher
(top basket).
- The cartridge holder (H) must not be washed
in the dishwasher, but simply rinsed under
running water.
7
1
2
Crystalys.EC1/3.Eu11 17/10/00, 11:1711