MTab8 User Manual
Content 1 Introduction...................................................................3 1.1 Announcements..................................................3 1.2 Safety Instruction.............................................. 3 2 MID Introduction......................................................... 4 2.1 MID Operation and Preparation........................4 2.2 MID Status and Reminder.................................. 4 3 Quick Start Guide.........................................................5 3.
4.6 Sound.................................................................24 4.7 Storage.............................................................. 24 4.8 Security&location............................................ 27 4.9 Users & accounts............................................. 29 4.10 Accessibility.................................................... 30 4.11 System..............................................................31 5 Internet............................................................
1 Introduction 1.1 Announcements Preventive maintenance 1.2 Please always keep the MID dry. To avoid the device short trouble, corrosion fault and electric short, please prevent the device, battery and charger from water and moisture, and don’t operate the device or charger by wet hand. To avoid failure of device, battery and charger, please prevent the device, battery, charger from violent shock or shake.
Please keep the MID far away from magnetic equipments, the radiation of MID may erase the data stored in the magnetic equipments. Never use the MID in the vicinage of high temperature, inflammable gas ( gas station). Protect the MID and accessories from kids reach scope, and avoid the kids to use the MID without parents’ supervision. Please comply with related rules and regulations, and respect others’ privacy and legal rights while using the MID.
New email Airplane Mode on USB connected USB debugging connected Return button Downloading Swipe up to show recently used apps Current electric volume. Home button WIFI connected, internet is available 3 Quick Start Guide 3.1 Keys Function Keys Function Description： Power button Volume +（up） Short press to sleep/wake up, long press to startup and shutdown. increase the volume Volume -（down） decrease the volume HOME button （ home ） Click it in any interface will return to main interface.
3.2 Startup and Shutdown Startup Long press POWER key for three seconds, you can enter into startup picture. The system enters into screen lock status, please unlock it. Shutdown 1．Long press POWER, it will popup shutdown window. 2．Shutdown window contains power off mode, restart mode and screenshot mode three options. 3． Click power off is the last step. 3.3 Open and Close of the Screen Screen will be closed on its own when no operation happens. 1.
3.4 Usage of Touch Screen MID operating methods There are below methods to view the main screen, menu and application procedure in your MID. Click When you want to use the screen keyboard typing or choose application in the main interface, you only need to touch it by your finger. Press on If you want to open some item(textbox or the link in the webpage), or shortcut and main procedure move, you can press on this item.
The extended home page The home page can be extended beyond the wideness of screen to provide more space, which you can put new-added shortcuts and widgets. Click the blank space in home page then slide right or left to extend to the right or left of the screen. In the home page, there are two extended pictures, as Picture 3.5-2. Picture 3.5-2 The shortcut icons management in desktop application. Create folder icon in desktop 1.
Picture 3.5-4 3.Long press to enter the home screen settings, as Picture 3.5-5. you can turn on the notification dots feature , A small circle will appear in the corner of the app icon to let users know which specific apps have new messages, and the long-pressed app will bring up a preview window for viewing messages.The circle's color also changes as the icon's color changes , such as On lock srceen、Allow notification dots、Default notification sound、Do Not Disturb , Figure 3.
Picture 3.5-6 Remove the icons in desktop 1. Long press the icons need to be remove, then on the right above of the screen, it will appear icons. 2. Drag the icon to the above of the remove icon, till the icon become red, then move your finger to delete the icon. Change the wallpaper of desktop 1．In home page, long press any blank space in main screen, it will popup a window to change the wallpaper. 2． Click the gallery or wallpaper gallery to select the wallpaper. 3.
Picture 3.6-1 Return to the previous menu Return to homepage Pinned Shortcuts If you press an application software, you can pop-up the sub menu, and then you can use this way to use some functions of the application quickly as Picture 3.6-2 Picture 3.
3.7 Typing words Use the screen keyboard When you start the procedure or choose the words or numbers edition, it will show the screen keyboard. The keyboard contains below typing options: 1. AndroidTM keyboard Choose the typing method you want 1. Click Setting procedure application. 2. Click Language and Keyboard. 3. In the text setting area will reveal all the installed words-typing methods in your MID. 4. Tick the typing method you want. Use and switch of input method 5 1 4 2 Picture 3.
3.9 Operation Technique Enter widgets interface In the application interface, click widgets on the above of screen, or slide the screen, it will switch into widgets interface. Long press any widget to create its shortcut, then you can enter into the application through the shortcut icon.
Click icon in right top of Picture , as Picture 4.1-1, You can search for what you want. Picture 4.1-1 You can search for what you want as Picture 4.1-2 Picture 4.
4.1.1. Connect Wi-Fi (1) In the main menu or interface, choose setting application procedure. (2)Click WLAN, open wifi, MID will automatically search the available Wifi wireless internet. As Picture 4.1-3 (3)Choose the Wi-Fi internet you want to connect, if it has password, it will popup the password window, enter password, click connect. 4.1.2 Add Network 1)Click Picture 4.1-3 icon in right top, as Picture 4.1-4 Picture 4.
1) Input network SSID, the wireless network name, click save. 2) Click user name already saved, click connect to use network, as Picture 4.1-5 Picture 4.1-5 4.2 Bluetooth Bluetooth function operation 1. Click setting application in main menu interface 2. Click Bluetooth and open it. 3. If somebody open Bluetooth in your surroundings, click search device in right above, then MID will automatically search the Bluetooth device nearby. As picture 4.
Picture 4.2-1 4．Click the available Bluetooth device, it will popup request window, enter into related password, and match the device to connect. 5．After match successfully, choose the operation you want to, click to enter into Picture 4.2-2. Picture 4.2-2 Bluetooth setting 1.Rename tablet Click Connected devices-Pair new device-Device name as Picture 4.
Picture 4.2-3 2.Display the file you received Choose display the file you received in Picture 4.2-4, you can view download and upload files. Picture 4.2-4 4.3 Apps & notification 4.3-1 APPS 1. Click setting application in Apps. 2. Select application, after enter, you can manage and delete installed application. (As Picture 4.
Picture 4.3-1 4.3-2 Notification 1. Open settings, click Notification, as Picture 4.3-2 Picture 4.3-2 2. Click on any app icon in the list, then you can choose to show notifications silently, block all notifications or don’t silence or block, as Picture 4.
Picture 4.3-3 4.4 Battery Click setting function, select battery, you can view the battery situation, as Picture 4.4-1 Picture 4.
4.5 Display 4.5-1 Night Light Mode 1. Click Setting application procedure. 2. Click display, choose Night Light Mode, 3. Click the “Turn on Now” button and it will go into night mode and the blacklight turns red , as Picture 4.5-1 Picture 4.5-1 4.5-2 Wallpapers 1. Click setting application. 2. Click display, click wallpaper. 3. You can choose different wallpapers as you like—gallery ---photos--wallpapers (system defect), as Picture 4.
4.5-3 Auto rotation System is defaulted as open auto rotation, when it is turned off, system won’t rotate MID screen by G-sensor. 4.5-4 Sleep 1. Click setting application. 2. Click display. 3. Click sleep. 4. Set the sleep time as you want, as Picture 4.5-3 Picture 4.5-3 4.5-5 Font size Click font size to adjust the size of the text, as Picture 4.5-4 Picture 4.
4.5-6 Display size Click Display size to adjust the size of the icons, as Picture 4.5-5 Picture 4.5-5 4.5-7 Screen saver 1.Click setting application. 2.Click display. 3.Click Screen saver. 4.Set the screensaver as you want, as Picture 4.5-6 Picture 4.
4.6 Sound Open settings, click Sound, as Picture 4.6-1 Picture 4.6-1 4.7 Storage Open setting function, click Storage, as Picture 4.
Picture 4.7-1 (1)Internal storage Internal storage is MID local NAND storage, as Picture 4.7-2, if you need to check the storage content, you can check it in main menu. Picture 4.7-2 Storage manager Storage manager is mainly used to help release storage space, used to delete the device above the backup photos and video files, you can choose the following way to manage, as Picture 4.7-3 Picture 4.
(2)SD card Click SD card to check the storage content ,as Picture 4.7-4 Picture 4.7-4 Safely remove or format SD card 1.Insert SD card 2.Click in picture 4.7-5 3.Click Settings 4.After the above two steps you can choose what you want to do,remove or format SD card ,as Picture 4.7-6 Note: Removing SD card safely can protect SD card and increase its lifetime. Picture 4.
Picture 4.7-6 4.8 Security&location 4.8-1 Set locked screen Lock the touch screen by unlock icon or password to protect your MID. Note: After setting screen locked, you should enter the pass code each time when you startup or screen is locked Set unlocked picture 1. Click setting application in main interface. 2. Click security. 3. Click screen lock. 4. Choose pattern in text setting area. 5. Click next following the remind message. 6.
Picture 4.8-1 Set unlock PIN code 1. Click setting application in main interface. 2. Click security. 3. Click screen lock. 4. Choose PIN in text setting area. 5. Enter new PIN code(numbers) and click continue. 6. Enter new PIN code again and click confirm. Set unlock password 1.Click setting application in main interface. 2.Click safe. 3.Click screen locked. 4.Set password in text setting area. 5.Set new password(letters and numbers) and then click continue. 6.
Picture 4.8-2 4.9 Users & accounts 1. Select setting application 2. Open account and sync, as Picture 4.9-1 Picture 4.
3. Click add an account, as Picture 4.9-2 Picture 4.9-2 4. After successfully load, it will open the sync function, as Picture 4.9-3 Picture 4.9-3 4.10 Accessibility 4.10-1. Font size Click it to make system font large size 4.10-2. Click power button to end calls When Click call, press “power” button, call will end but not hold.
4.10-3. Touch and hold delay Click touch and hold delay to increase time, as Picture 4.10-1 Picture 4.10-1 4.10-4 Install webpage script It will allow you install webpage scrip when you open system,, but it will increase the risk when you are browsing webpage. 4.11 System 4.11-1 Language and Input Method Click setting, select language and input method, choose language , then click Add a language, select the language you want to add from the language list, as Picture 4.11-1.
Picture 4.11-1 Click setting, choose language and input, choose GoogleTM keyboard setting, click input language, as Picture 4.11-2 Picture 4.
Choose the language you want to change in the language list, as Picture 4.11-3 Picture 4.11-3 4.11-2 Date and Time According to the preset, system will voluntarily apply the date, zone, and time provided by internet. as Picture 4.11-4 Manual set date, time and zone 1． Click Setting application procedure. 2． Slide down the screen, then click date and time. 3． Turn off “auto setting of date and time”. 4． Turn off “auto setting zone’. 5． Click Zone Selecting, then choose the zone lists.
Picture 4.11-4 Note: If you use the time internet provided, you will not able to set the date, time and time zone. 4.11-3 backup Connect WIFI and login your google account, choose backup my data, system will backup your data into google server. as Picture 4.11-5 Picture 4.
4.11-4 System update Check to see if the system is up-to-date ,as Picture 4.11-6 Picture 4.11-6 4.11-5 Reset options If you need to recovery factory reset, please click reset, as Picture 4.11-7, if you need to formulate NAND, please click reset tablet. Picture 4.
4.11-6 Multiple users Multi-user in Android is similar to multi-user in Windows, and can support multiple users to use the system.Typically, the first user registered with the system becomes the system administrator by default. You can add and remove users and switch between different users,as Picture 4.11-8 Picture 4.
5 Internet 5.1 Browser In case of Wi-Fi or mobile internet is connected well (Please refer to Chapter 4.1 for wireless and internet setting), click IE browser in the main menu or desktop to enter the IE interface, as Picture 5.1-1 Address column Save bookmark menu Picture 5.1-1 Click address bar to input the website, click start, enter into related webpage, then you can browse the website information, as Picture 7.
Picture 5.1-2 5.2 Email Email application procedure contains email setting guide, you can add the external POP3 OR IMAP email account of normal web email service provider (For instance, Google,Outlook,Hotmail,and Live,Yahoo, Gmail, Hotmail Exchange and office 365and other),as Picture 7.2-1 Picture 5.
a. Email Setting 1．After you click the sending email icon setting guide, which can help you to set. , you can see the email 2．Input your email address and password. 3．Click “Next step” button, choose your email type is POP3 or IMAP. 4．Click “Next Step” button to check whether the email box servicer can receive or send emails 5．Input the email account and display the email subject, and click finish. 6．If the email box is available, you will enter into your mail box automatically. b.
Click it and Add attachment Picture 5.2-2 6 Troubles Shooting 1. The first startup of MID is slow After the MID system upgraded, the first startup need to install the pre-installed application software, the lead time is around 2-3 minutes, the startup afterwards will be much quicker. 2. MID can’t connect Wi-Fi Make sure the wireless router of internet service can work in normal. Ensure the MID and wireless router in certain distance, and no wall or other barrier between them.
3. MID feels hot When many application procedures are used in meanwhile, or the brightness of screen open to the lightest or under charging, MID may feel fever. It is normal. 4. 5. Email can’t be set or Registration of application procedure. Ensure your internet is well connected. Make sure your email setting way is correct. Keep your system time and local time consistent. The system is abnormal and can’t work.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
