User`s guide

CHAPTER

Quick Reference: MOTU Video Setup

Indicates when the V4HD has

successfully achieved lockup to

the currently selected input or,

in Playback mode, clock source,

which could be the V4HD’s inter-

nal clock or the video REF IN jack.

Click a tab to view its settings to the right. The

SETUP tab has global settings, such as the

Playback Only mode button. For complete

details on the settings in these tabs, see

chapter 6, “MOTU Video Setup” (page 41).

This is the video source menu. The V4HD has two video modes:

In Capture/Convert mode, use this menu to choose the source video input on

the V4HD’s rear panel. This is the input that the V4HD routes to all outputs

and the computer. In Playback mode, the Signal Path Diagram displays the

playback signal path (from the computer to the V4HD outputs).

This area of MOTU Video Console provides a signal path

diagram (from left to right) for Playback mode or

Capture/Convert mode. The upper path shows HD output and

the lower path shows SD output. As indicated by arrows, some

items are menus from which you can choose settings.

This column shows the various HD

and SD destinations, including HD

and SD outputs on the V4HD itself,

the HDMI output (which can alter-

nately be used for DVI output), and

FireWire Capture (in Final Cut Pro).

Click a tab on the left to

view its settings here.