User`s guide

APPENDIX
109
C V4HD Specifications
VIDEO I/O
■ 1 x HD-SDI in and out (4:2:2 10-bit) on
independent BNC connectors
■ 1 x SD-SDI in and out (4:2:2 10-bit) on
independent BNC connectors
■ 1 x extra HD-SDI output connector
■ 1 x extra SD-SDI output connector
■ 1 x HDMI output (4:2:2 10-bit, YCbCr or RGB)
■ Support for DVI output with HDMI-to-DVI
adapter (sold separately)
■ 1 x HD component in and out (10-bit, YPbPr or
RGB) on independent BNCs
■ 1 x SD component in and out (10-bit, YPbPr or
RGB) on independent BNCs
■ 1 x composite in and out (10-bit)
■ 1 x S-video in and out (10-bit)
■ 12-bit A/D and D/A converters on all analog
video in/out with up to 8x oversampling
■ 1 x 400 Mbit (1394) FireWire A
■ 2 x 800 Mbit (1394b) FireWire B
AUDIO I/O
■ 32 channels of simultaneous audio input and
output
■ 8 channels of analog in/out at all standard
sample rates from 44.1 to 192kHz
■ 4 x XLR analog in/out — provides 4-channel
direct connection without a breakout cable
■ 8 channels of AES/EBU digital in/out at sample
rates up to 96kHz
■ 2 x AES/EBU connectors — provides 4-channel
direct connection without a breakout cable
■ 8-channel HD-SDI and SD-SDI embedded
audio in/out, 24-bit at 44.1 or 48kHz
■ 8-channel HDMI embedded audio output, 24-
bit at 44.1 or 48kHz
■ 8-channel ADAT optical digital audio in/out —
includes a second bank of optical connectors for 8-
channel operation at sample rates up to 96kHz.
■ Flexible 8-channel sample rate conversion —
apply rate conversion to any 8-channel digital
input or output bank, including AES/EBU,
embedded and optical.
■ Front panel headphone jack with dedicated
volume control
■ Programmable front panel volume control for
up to 32 audio outputs — push the headphone
volume knob and then turn it to control output
level for any/all outputs, from stereo main outs to
7.1 surround to all 32 outs. The LCD provides
visual feedback for the digital rotary encoder as the
user turns it.
■ CueMix FX built-in monitor mixer — 32-
channel, 16-bus mixer for monitoring live inputs
from cameras, mic preamps or other audio sources
with no delay. Set up send/return loops to digital
mixers and outboard audio processing.
■ Multiple CueMix FX mixes — create up to 16
separate stereo monitor mixes (four stereo at 176.4
or 192kHz) for main outs, headphones, outboard
gear send/return loops, etc.