User`s guide

CHAPTER
INSTALLING THE PCIE-424 HARDWARE
11
3 Installing the PCIe-424 Hardware
OVERVIEW
Install the PCIe-424 software first! . . . . . . . . . . . . . . . . . . . 11
Install the PCIe-424 audio card . . . . . . . . . . . . . . . . . . . . . . 11
Connect the audio interface . . . . . . . . . . . . . . . . . . . . . . . . . 12
INSTALL THE PCIE-424 SOFTWARE FIRST!
We recommend that you install the PCIe-424 software before
installing the PCIe-424 card itself.
If you’ve already installed the card, you might want to
temporarily remove it to install the software, and then put it
back in after installing the PCIe-424 software.
INSTALL THE PCIE-424 AUDIO CARD
1 Switch off and unplug your computer.
☛ Failure to do so may result in serious shock or injury.
2 Open your computer.
3 Find an available PCIe slot.
4 Remove the slot cover, if necessary.
5 Before removing the PCIe-424 card from it’s anti-static
bag, touch the power supply inside your computer to
discharge any static electricity that may have built up on you.
6 Remove the PCIe-424 card from its anti-static bag.
7 Gently but firmly insert the card into any available PCIe
slot.
8 Secure the bulkhead of the PCIe-424 card to the computer
chassis with the bolt from the slot cover.
☛ We strongly recommend securing the PCIe-424 card in
this manner. Doing so allows you to ensure secure
connections to the card later on in the installation.
9 Place the cover back on your computer.
10 Reconnect the power cord to the computer before
proceeding.