User`s guide

SONAR AND OTHER WDM SOFTWARE
84
Figure 8-2: The PCI-424 system’s inputs and outputs appear in the
Audio Options window under the Drivers tab. If you highlight them,
they appear in the track input and port menus for each track.
SONAR AUDIO SETTINGS
Only a few of Sonar’s audio settings require specific
settings for the PCI-424 system.
Playback/Record Timing Master
In the Audio Options window, under the General
tab, be sure to choose a PCI-424 output and input
for playback and recording timing. It doesn’t
matter which input or output you choose.
Consult your Sonar documentation for the other
settings in the General tab of the Audio Options
window.
Figure 8-3: Make sure you have chosen a PCI-424 input and output
for the playback and record timing master settings.
The Wave Profiler
If you see the alert shown below in Figure 8-4 when
launching Sonar, go to the Audio Options window
(Figure 8-3) and click the Wave Profiler button.
Doing so adjust the DMA buffers, and other
settings, so that Sonar can successfully use all
PCI-424 inputs and outputs.
Figure 8-4: Recommended Advanced settings.