User Manual

CUEMIX FX
43
THE METERS TAB
The Meters tab (Figure 7-5) serves as a
comprehensive meter bridge for all
inputs, outputs and mix busses in the
MicroBook, giving you a “bird’s-eye”
view of all signal activity.
Channel meter display
The channel meter display (Figure 7-5)
provides a long-throw meter for the input
or output that currently has the focus in
the Input/Output tabs.
Pre/post processing switch
The pre/post processing switch
(Figure 7-5) affects all input meters (and
the meter in the channel meter display
above the tab, if this area is displaying an
input meter). Click Pre to view levels
before any EQ or dynamics processing;
click Post to view levels after EQ or
dynamics processing.
Figure 7-5: The Meters tab.
THE SIGNAL GENERATOR TAB
The Signal Generator tab (Figure 7-6)
provides settings for the Sine Wave
generator (frequency and amplitude) and
the White/Pink noise generators
(amplitude). Use the Output Source
menus in the Outputs tab (Figure 7-4) to
choose the desired ouput(s) for these test
signals.
Figure 7-6: The Signal Generator tab.
Meters tab
Channel
meter
display
Pre/post
processing
switch
Pre/post
processing
switch