User Manual

HARDWARE INSTALLATION
39
SETUP FOR TWO INTERFACES
Use this setup if you want to connect two MOTU
interfaces to your computer.
■ The connection to the computer should be
Thunderbolt, if possible, to support all the I/O for
the networked interfaces.
■ Use a standard Thunderbolt cable. Place it at the
end of the Thunderbolt chain.
■ Use any standard CAT-5e Ethernet network
cable to connect the two interfaces together using
their NETWORK ports.
■ As an alternative, see “Setup for multiple
Thunderbolt and USB interfaces” on page 42.
About CAT-5e cables
Use shielded CAT-5e or
CAT-6 cables, which are a
higher grade version of a
standard Ethernet patch
cable. They are available
wherever network cables
are sold.
OR