User guide

USING CLOCKWORKS FOR MAC OS X WITH THE MIDI TIMEPIECE AV 4
THE FILE MENU
Here is a brief explanation of each item in the ClockWorks File
menu.
Device List
The Device List menu item opens the Device List window.
Load Configuration
The Load Configuration menu item opens a previously saved
ClockWorks document and restores all of the MIDI Timepiece AV
settings saved in the document.
Save Configuration
The Save Configuration menu item saves all the current MIDI
Timepiece AV settings in ClockWorks as a document on disk. To
restore the settings, open it with the Load Configuration
command.
Refresh Device
ClockWorks always reflects the current state of the MIDI
Timepiece AV. However, if at any time you suspect that the
windows in ClockWorks don’t accurately reflect what’s going on
in the hardware for some reason, choose
Refresh Device from the
File menu. ClockWorks will be updated to reflect the current state
of the hardware.
Rename Hardware
Lets you modify the name of the currently selected device in the
Device List window.
Reset to Factory Settings
Restores the factory default settings in the MIDI Timepiece AV.
SAVING AND LOADING CONFIGURATIONS
ClockWorks lets you save the entire contents of the MIDI
Timepiece AV’s memory as a file on disk. The file can later be
opened and modified at any time. This allows you to store an
unlimited number of MIDI Timepiece AV setups.
ClockWorks handles file saving and loading with the
Save
Configuration
and Load Configuration commands in the File
menu.
THE ROUTING TAB
The Routing tab provides an easy and powerful way for you to
route MIDI data from any device connected to the MIDI
Timepiece AV to any other device connected to it. This window
provides you with complete control over the flow of MIDI data
through the interface.
Figure 2: The Routing Tab.
Cable routing to and from the computer
In the MIDI Timepiece AV, a l l M I D I i n p u t s a n d outputs are always
connected to the computer. Therefore, in ClockWorks, routings
to and from the computer are not shown in the
Routing tab. Use
the
Routing tab to make routings directly from inputs to outputs,
or to make connections between the computer and the ADAT,
MMC or MTC ports.
Figure 1: The ClockWorks windows.
ROM version
Tabs
Device list window
Sync and
MIDI Machine
Control section