User guide

CONFIGURING HOST AUDIO SOFTWARE
61
Figure 7-8: Enabling inputs and outputs in SONAR.
Using the MOTU WDM driver
1 Go to SONAR’s Preferences.
2 In the Audio preferences section, choose
Playback and Recording.
3 Choose WDM/KS as the Driver Mode, as shown
below.
Figure 7-9: Enabling the MOTU WDM driver in SONAR.
4 Next, in the Audio preferences section, choose
Devices.
5 Check the 896mk3 Hybrid inputs and outputs
that you wish to use and uncheck the ones you
don’t, as shown in Figure 7-7 on page 60.
Other audio settings in SONAR
There are a few other settings in SONAR that
impact 896mk3 operation:
1 In the Audio preferences section, choose Driver
Settings.
2 Choose an 896mk3 input and output for
recording and playback timing as shown below in
Figure 7-10. It doesn’t matter which input or
output you choose.
Figure 7-10: Make sure you have chosen a 896mk3 input and output
for the playback and recording timing master settings.
3 Additionally, if you are using the MOTU WDM
driver, click the Wave Profile r button and run the
Wave Profiler. This process chooses the optimum
settings for the 896mk3 hardware.
Figure 7-11: Running the Wave Profiler in Cakewalk’s SONAR.
896mk3 Hybrid book Page 61 Friday, August 19, 2011 2:04 PM