Owner's Manual

2
Installation


The Piccolo XR Plus unit can be attached to any vertical or
horizontal surface using screws. Before mounting the Piccolo
XR Plus, verify that sufficient clearance is left around the unit.
Allow 8" (20 cm) clearance off the bottom of the Piccolo XR
Plus
case for the user cable and 6.3" (16 cm) off the top of the
unit
for the flexible antenna.
Piccolo XR Plus Screw Mounting Options
Mount the Piccolo XR Plus on a vertical surface as
follows:
Secure the unit to any vertical surface using one 0.35"
(9 mm) maximum head screw. Use the mounting hole
marked A in Figure 14 to attach it to the mounting surface.
See Figure 15 B.
Mount the Piccolo XR Plus on a horizontal surface as
follows:
Secure the unit to any horizontal surface using two 0.35"
(9 mm) maximum head screws. Use the mounting holes
marked B and C in Figure 14 to attach it to the mounting
surface. See Figure 15 A.
Mount the Piccolo XR Plus on a wide plane as follows:
Secure the unit to any plane using three 0.35" (9 mm)
maximum head screws. Use all three mounting hole marked A,
B and C in Figure 14 to attach it to the mounting surface. See
Figure 15 C.