Datasheet
ZD34007c_e.doc / Nov-15 Page 36 / 50
F10
Range
Default
Ser.
097
Switching characteristics K1
0 … 5
0
I4
0=
active with display ≥ preselection
1=
active with display ≤ preselection
Remark:
≥ and ≤ refer to
positive values
and are inversely
with negative
values
2=
active with display ≥ preselection, 0→counter.
Remaining errors are cancelled
3=
active with display ≤ preselection,
Set→counter. Remaining errors are cancelled
4=
active with display ≥ preselection, 0→counter
Remaining errors added to following cycle
5=
active with display ≤ preselection,
Set→counter
Remaining errors added to following cycle
098
Switching characteristics K2 (see K1, F10.097)
0 … 5
0
I5
099
Switching characteristics K3 (see K1, F10.097)
I6
100
Switching characteristics K4 (see K1, F10.097)
I7
101
Set value of the counter
0 … 1
0
I8
0=
Set value = Preset (1 or. 2)
1=
Set value = Preselection K1 or K2
102
K1 – K4 outputs N.C or N.O *)
0 … 15
0
I9
K1=
binary value 1
K2=
binary value 2
Example: Setting
9 means that K1
and K4 operate
N.O. and K2 and
K3 operate N.C *)
K3=
binary value 4
K4=
binary value 8
Bit = 0: Output switches ON when active (N.O.) *)
Bit = 1: Output switches OFF when active (N.C.) *)
103
Sign of thumbwheel switches (models ZD6xx only)
see appendix
0
J0
104
Thumbwheel switch assignment (models ZD6xx only)
see appendix
0
Q1
105
Start-up Inhibit of timed K1-K4 outputs
after power-up
0 = pulses enabled
1 = pulses disabled
0
Q2
106
Switch point calculation with trailing preselections
0: K1=>K1, K2=>K2, K3=>K3, K4=>K4
1: K1=>K1, K1-K2=>K2, K3=>K3, K4=>K4
2: K1=>K1, K2=>K2, K3=>K3, K3-K4=>K4
3: K1=>K1, K1-K2=>K2, K3=>K3, K3-K4=>K4
Example: if set to “1” the K2 switching point would be
substituted by the difference K1 - K2 (i.e. F00.000 - F00.001)
0 … 3
0
Q3
*) N.O. means “normally open”, saying that the corresponding output is normally switched
OFF and will switch on when the assigned event happens.
*) N.C. means “normally closed”, saying that the corresponding output is normally switched
ON and will switch off when the assigned event happens