Instructions

ZU210_01a_oi_e.docx / Jun-19 page 6 / 59
2. Introduction
The device is designed as a signal converter with control inputs and outputs. Its extensive functions
make it universally applicable.
2.1. Operating Mode
Basically all functions have to be configured in the parameter menu. The device can be used in the
following operating modes:
 Operation as frequency converter for incremental input signals (replaces FU252)
 Operation as position transducer / counter for incremental input signals (replaces ZU252)
 Operation as absolute value converter for SSI signals (replaces IV251)
2.2. Function diagram