Datasheet

FS34002a_e.doc / Nov-15 Page 41 / 43
10. Specifications and Dimensions
AC power supply :
24 V~ +/-10%, 15 VA
DC power supply :
24V- (17 – 40V), approx. 100 mA (+ encoders)
Aux. encoder supply outputs:
2 x 5,2 VDC, 150 mA each
2 x 24V DC, 120 mA each
Inputs :
2 universal encoder inputs
4 digital control inputs HTL (Ri = 3.3 kΩ)
Low < 2.5 V, High > 10 V, min. pulse width 50 µsec.
Counting frequency (per encoder) :
RS422 and TTL differential: 300 kHz
HTL single ended: 200 kHz
TTL single-ended: 200 kHz
Switching outputs (all models) :
Relay outputs :
(models FS641 only)
4 fast power transistors 5 - 30V, 350 mA (b)
Response time < 1 ms (a),
4 relays (dry changeover contacts) (b)
AC switching capability max. 250 V/ 1 A/ 250 VA
DC switching capability max. 100 V/ 1A/ 100 W
Serial link :
RS232, 2400 – 38400 Bauds
Analogue outputs :
0…+/- 10V (load max. 2 mA)
0...20mA (load max.270 Ohm)
Resolution 14 bits, Accuracy 0.1%
Overall response time < 1 ms (a)
Ambient temperature :
Operation: 0 - 45°C ( 32 – 113°F)
Storage: -25 - +70°C (-13 – 158°F)
Housing :
Norly UL94 – V-0
Display :
6 Digit, LED, high- efficiency red, 15mm
Protection class (front side only) :
Protection class rear side :
FS 340: IP65
FS 641: IP20 (with use of the plexiglass
cover part # 64026 also IP65)
IP20
Screw terminals :
Cross section max. 1.5 mm²,
Conformity and standards:
EMC 89/336/EEC: EN 61000-6-2
EN 61000-6-3
LV73/23/EEC: EN 61010-1
(a) Continuous serial communication may temporary increase response times
(b) Diode or RC filtering is mandatory when switching inductive loads