Datasheet

Dz210_01c_oi_e.doc / Nov-15 Page 7 / 14
3.6. Transistor Outputs
Both transistor outputs "Out1" und "Out2" (terminal X3) operate in parallel to the relay
functions, but respond much faster (200 µsec only) than the relays.
The outputs are rated to switch DC voltage from 7 - 30 V at maximum currents of
350 mA (each).
The transistor outputs are 100% short-circuit-proof, however not both outputs must be short-
circuited at the same time for a longer duration.
3.7. The front LEDs
The green LED on the front side of the unit signals that the unit is ready for operation. The
yellow LED signals the input frequency, i.e. it will blink or be lit while the unit detects rotation,
and it will be off when the unit detects standstill.