Datasheet

Dz210_01c_oi_e.doc / Nov-15 Page 12 / 14
The drawing below explains the operation of the direction outputs upon a change of direction.
Channel A
= Forward motion = Reverse motion
(1)
(2)
Channel B
 With case (1) the window has been set to 1 impulse only. As a result the unit immediately
changes the output already after the very first impulse into the opposite direction.
 With case (2) a window >1 has been set, wherewith the short change of the phase
between channels A and B does not affect the direction signal.