Instructions

Ax350_06a_oi_e.docx / Aug-19 page 64 / 78
Error type
Error code
Name
Description
32768 / 0x 8000
Application errors in the device-no details
Access was denied by the device. No
detailed information is available.
32785 / 0x 8011
Index does not exist
Access to a non-existent index.
32786 / 0x 8012
Subindex does not exist
Access to a non-existent subindex..
32800 / 0x 8020
Service not available at this time
The parameter cannot be accessed at this
moment. The device does not allow this in
the current state.
32803 / 0x 8023
Access denied
Write access to a read-only parameter.
32816 / 0x 8030
Parameter value out of range
Parameter value is outside the allowed
range of values.
32817 / 0x 8031
Parameter value greater than specified range
The written parameter value is greater
than the specified value range.
32818 / 0x 8032
Parameter value less than specified range
The written parameter value is smaller
than the specified value range.
32819 / 0x 8033
Parameter length too large
Parameter length is greater than allowed.
32820 / 0x 8034
Parameter length too small
Parameter length is less than allowed.
32821 / 0x 8035
Function not available
The device does not support the command.
32822 / 0x 8036
Function not available at this time
The command is not supported by the
device in its current state.
32832 / 0x 8040
Invalid parameter set
Written single parameter value collides
with the other parameter settings.
32833 / 0x 8041
Inconsistent parameter set
Inconsistencies were detected at the end
of the block parameter transfer. The device
plausibility check failed.
32898 / 0x 8082
Application not ready
Access was denied because the device is
not ready.