Instructions
Ax350_06a_oi_e.docx / Aug-19 page 44 / 78
Continuation „Display Menu:“
SOURCE DUAL DOWN (Reference source for two-line display, second line)
0
INPUT 1
the reference source is input 1
1
INPUT 2
the reference source is input 2
2
LINKAGE 1 – 2
the reference source is the result of the linking of input1 and input 2
3
INPUT 1 TOTAL
the reference source is input 1 with totalization
4
INPUT 2 TOTAL
the reference source is input 2 with totalization
5
LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
6
IO LINK VALUE 1
the reference source is the process data out value 1 sent by the IO-Link master
7
IO LINK VALUE 2
the reference source is the process data out value 2 sent by the IO-Link master
8
MINIMUM VALUE 1
minimum value, the reference source is input 1
9
MAXIMUM VALUE 1
maximum value, the reference source is input 1
10
MINIMUM VALUE 2
minimum value, the reference source is input 2
11
MAXIMUM VALUE 2
maximum value, the reference source is input 2
LARGE DISPLAY
This parameter is used to turn on or off the large display window. Using the divider ratio, the large display value
can also be divided.
0
NO
Large display is switched off
1
1:1
Large display with divider ratio 1:1
2
1:10
Large display with divider ratio 1:10
3
1:100
Large display with divider ratio 1:100
4
1:1000
Large display with divider ratio 1:1000
5
1:10000
Large display with divider ratio 1:10000
SOURCE LARGE (Reference source for large display)
Parameter only visible with activated parameter "LARGE DISPLAY".
0
INPUT 1
the reference source is input 1
1
INPUT 2
the reference source is input 2
2
LINKAGE 1 – 2
the reference source is the result of the linking of input1 and input 2
3
INPUT 1 TOTAL
the reference source is input 1 with totalization
4
INPUT 2 TOTAL
the reference source is input 2 with totalization
5
LINKAGE TOTAL
the reference source is the result of the linking of input1 and input 2 with
totalization
6
IO LINK VALUE 1
the reference source is the process data out value 1 sent by the IO-Link master
7
IO LINK VALUE 2
the reference source is the process data out value 2 sent by the IO-Link master
8
MINIMUM VALUE 1
minimum value, the reference source is input 1
9
MAXIMUM VALUE 1
maximum value, the reference source is input 1
10
MINIMUM VALUE 2
minimum value, the reference source is input 2
11
MAXIMUM VALUE 2
maximum value, the reference source is input 2
The totalization depends on the operation mode. See chart in chapter IN 1 Totalization.